Convert construction materials without the guesswork
Free unit converters for construction and home-improvement projects. Enter a quantity, pick your material, and get the converted amount with the density and math shown — not just a number.
Free · No login · Density shown, not hidden
Choose your converter
What each one takes, what it gives back, and a real example worked by the converter itself.
Cubic Yards to Tons
Convert cubic yards to tons or tons to cubic yards for gravel, sand, topsoil, mulch, asphalt millings and concrete.
You enter: A quantity in cubic yards or tons, and the material.
You get: The other unit, plus cubic feet, pounds and roughly how many 10-ton truck loads.
Example: 3 cubic yards of topsoil
- Estimated weight: 3 tons
- Cubic feet: 81 cu ft
- Pounds: 6,000 lb
Board Foot Calculator
Board feet from thickness, width and length with a total cost, or linear feet to board feet for standard lumber sizes (2x4, 2x6, 2x8 and more).
You enter: Thickness, width, length and quantity (with an optional price), or linear feet of a standard size.
You get: Board feet in total and per piece, cubic feet and the cost; from linear feet, board feet plus the board's actual size and face coverage.
Example: 96 linear feet of 2x8
- Board feet: 128 board feet
- Actual (finished) size: 1.5 in × 7.25 in
- Face coverage: 58 sq ft
Shingles & Roofing Squares
Get a roof's pitch, angle and percent slope from rise and run, then roofing squares and shingle bundles from the footprint.
You enter: Rise and run in any one unit, or a footprint area and the pitch.
You get: Pitch as x/12, angle in degrees, percent slope and multiplier; or sloped area, squares and bundles.
Example: A 5 in rise over 12 in of run
- Roof pitch: 5/12 pitch
- Roof angle: 22.62°
- Percent slope: 41.67%
Paint Coverage
Convert square feet to gallons of paint needed, or gallons on hand to the area they will cover.
You enter: Square feet or gallons, the surface type and the number of coats.
You get: The other unit, plus how many gallon cans to buy.
Example: 2 gallons on smooth, painted drywall, two coats
- Area you can cover: 400 sq ft
- Quarts: 8 qt
- Recommended purchase: 2 gallon can(s)
Bags to Cubic Yards
Convert bag count to cubic yards or back, for concrete mix, mulch, topsoil, sand and gravel.
You enter: A number of bags or cubic yards, and the bagged product.
You get: The other unit, plus cubic feet and the total bag weight.
Example: 40 bags of 2 cu ft mulch
- Cubic yards equivalent: 2.96 cubic yards
- Cubic feet: 80 cu ft
- Bags per cubic yard: 13.5 bags
Run a website for suppliers, contractors or DIYers? Add any of these converters to your pages, free →
Which converter do I need?
Start from the job in front of you. A converter helps when you already have a number in one unit and need it in another. If you only have the size of the area, a project calculator on our sister site works out the quantity first.
| Your job | Use |
|---|---|
| Your plan says cubic yards, but the gravel, sand or topsoil yard sells by the ton | Cubic Yards to Tons |
| Filling a small pad, post holes or a flower bed with bagged concrete, mulch or soil | Bags to Cubic Yards |
| Pricing hardwood or framing lumber that's quoted per board foot | Board Foot Calculator |
| Finding a roof's pitch or angle, or ordering shingles for a re-roof | Shingles & Roofing Squares |
| Buying paint for a room or a whole house, or checking how far leftover cans will go | Paint Coverage |
| You know the area and depth of a driveway, slab or bed, but not how much material it takes | Build Material Planner's gravel, concrete or mulch calculator |
How the numbers are worked out
Every converter uses typical published figures for the material, kept in one place so the same material never gets two different numbers. Each result lists the figure it used, so you can check it against your supplier's.
Weight per cubic yard (cubic yards to tons)
Tons = cubic yards × pounds per cubic yard ÷ 2,000. Moisture and compaction change the real weight, so a supplier's scale ticket wins.
| Material | lb per cu yd | Tons per cu yd | Cu yd per ton |
|---|---|---|---|
| Gravel / Crushed Stone | 2,700 | 1.35 | 0.74 |
| Sand | 2,700 | 1.35 | 0.74 |
| Topsoil | 2,000 | 1 | 1 |
| Mulch (bark / wood chip) | 500 | 0.25 | 4 |
| Asphalt Millings (RAP) | 2,700 | 1.35 | 0.74 |
| Concrete (poured, ready-mix) | 4,050 | 2.03 | 0.49 |
Bag yields (bags to cubic yards)
A cubic yard is 27 cubic feet, so bags per yard = 27 ÷ the bag's yield. Yields are the typical figure printed on the bag.
| Product | Yield per bag | Bags per cu yd |
|---|---|---|
| Concrete Mix (40 lb bag) | 0.3 cu ft | 90 |
| Concrete Mix (50 lb bag) | 0.375 cu ft | 72 |
| Concrete Mix (60 lb bag) | 0.45 cu ft | 60 |
| Concrete Mix (80 lb bag) | 0.6 cu ft | 45 |
| Mulch (2 cu ft bag) | 2 cu ft | 13.5 |
| Topsoil (0.75 cu ft bag) | 0.75 cu ft | 36 |
| Sand (0.5 cu ft bag) | 0.5 cu ft | 54 |
| Gravel (0.5 cu ft bag) | 0.5 cu ft | 54 |
Paint coverage per gallon
Gallons = square feet × coats ÷ coverage, rounded up to whole cans in the result. Smooth drywall / previously painted: 400 sq ft per gallon; Standard new drywall: 350 sq ft per gallon; Textured / stucco: 300 sq ft per gallon; Masonry / brick / block: 250 sq ft per gallon.
Board feet
Board feet = thickness (in) × width (in) × length (ft) ÷ 12, using the nominal size the lumber is sold under. A 2x6 that's 8 ft long is 8 board feet, though it really measures 1.5 × 5.5 in.
Roof pitch, squares and bundles
Pitch is rise per 12 in of run. Sloped area = footprint × √(rise² + 144) ÷ 12; a square is 100 sq ft of that area. Bundles = squares × 3, plus 10% waste, rounded up. Below 2/12, shingle makers generally don't allow asphalt shingles, and up to 4/12 they generally ask for extra underlayment; the result warns you in both cases.
Who builds it
ConstructionConverter is a small independent site, a sister to Build Material Planner. Each formula is checked by hand against published reference values before it goes live, and automated tests tie every table on the site back to the converter that uses it. Figures were last reviewed 2026-09. Spot a number that looks off for your area? The converter pages show exactly what was assumed, so you can adjust.
Newest updates
- November 1, 2026: Shingles & Roofing Squares. Added the roof pitch mode, a 2/12 to 12/12 chart and low-slope shingle warnings.
- October 9, 2026: Board Foot Calculator. Added the thickness × width × length mode with cost.
Why not just use a generic converter?
A generic unit converter can turn yards into feet, but it has no idea what a cubic yard of gravel weighs — that takes a material's density, which is different for every material. Every converter here bakes in real density values per material and shows the assumptions behind the number, not just a bare unit-math result.
What this isn't
These converters are not a substitute for a supplier's own weight ticket on a delivered load, and they don't work out how much material a project needs from its dimensions — for that, see a project material calculator such as buildmaterialplanner.com's gravel, concrete or mulch calculators.
Frequently asked questions
Converting gravel: what is one cubic yard in tons?
About 1.35 tons, using a typical 2,700 lb per cubic yard for crushed stone. Wet, compacted or very fine material weighs more, so confirm with your supplier before ordering by weight.
How much does a cubic yard of topsoil or mulch weigh?
Topsoil runs about 2,000 lb a cubic yard (1 tons) and bark or wood-chip mulch about 500 lb. Both get much heavier when wet.
One cubic yard of concrete equals how many premix bags?
About 60 bags of 60 lb mix (each yields 0.45 cu ft) or 45 bags of 80 lb mix (0.6 cu ft each). Smaller bags take more: 90 bags of 40 lb mix (0.3 cu ft each) or 72 bags of 50 lb mix (0.375 cu ft each). A cubic yard is 27 cubic feet. Past a yard or so, ready-mix delivery is usually cheaper than bags.
How many board feet are in a 2x4x8?
5.33 board feet: 2 in × 4 in × 8 ft ÷ 12. Board feet use the nominal size (2x4), not the planed size (1.5 × 3.5 in), which is how lumber yards price it.
How many square feet does a gallon of paint cover?
Between 250 and 400 sq ft per coat, depending on the surface: smooth, painted drywall takes the least paint and masonry or brick the most. Check the coverage printed on the can for your exact product.
How many bundles of shingles are in a square?
Most three-tab and architectural shingles come 3 bundles to a square, and a square is 100 sq ft of roof surface. The roof calculator adds 10% waste for cuts, starter and ridge.
What is a 6/12 roof pitch in degrees?
About 26.57 degrees: 6 in of rise for every 12 in of run, a 50% slope. Its multiplier is about 1.118, so each square foot of footprint is about 1.118 sq ft of roof.
Is ConstructionConverter free?
Yes. Every converter is free with no account or login, and every result shows the density, coverage rate or formula it used.
How accurate are the conversions?
They use typical published figures for each material, not your supplier's weight ticket or your paint's label. Treat a result as a close estimate and confirm anything you pay for by weight or by the can.
Can I put these converters on my own website?
Yes, free. Each converter has an embed code that runs the same tool in a frame on your page, with a small credit link under it.